Tag Archives: Jeep

Modifications and Tips Old Jeep CJ-7 Year ’80-’84

Posted on by

How to modify your Jeep vehicle to achieve maximum performance.

Stage I
ignition

Changing the Delco ignition system with the CDI system, replacement  spark plug wires.
Replacement of spark plugs as needed.
cylinder head
Puree the hole and also the combustion chamber hole and the oil chamber.
Replace a standard valve with a double per (suggestion use products from iskyndariancams) perfected valve seat (by way menyekir). The bottom of the cylinder head taken nomore than 1.25 mm. head exhaust
Replacement of the head exhaust (headers). Suggested use Clifford or Borla.

Stage / Step II
Do it like a stage / step I but now the engine block also dissected.
housing
Re Membalance crutch and replace Noken according to taste (260, 272, 282, etc.) the greater the degree is also a growing number of oil / gasoline is needed.
Carburetor and fuel lines
Replace the carburetor as needed. (Two barrels, four barrels or six barrels).
Replacement of the oil inlet (intake manifold), do not do the refining in the oil inlet. Use the Clifford product for replacement oil inlet.
Re Membalance flywheel (fly wheel), then do a reduction on the flywheel is not more than 25% by weight of the flywheel.
Substitute at the gas station, the power as needed.

Modifications Turbocharger and Modifications CJ Wrangler Rim

Posted on by

Modification of the turbocharger is not for amateurs, unless it comes with the package.Modification of the turbocharger is not a new thing, some of this year-end enthusiastusers turbocharger increases. Even some standard vehicles already equipped with turbochargers.
Turbocharger is matched with a small capacity engine with low compression due to the amount of fuel that support.
Turbochargers can add a lot of power without having to change the capacity of the engine or engine swap.

Modifications CJ wrangler rim
For those readers who have a jeep car category, there must be some who ask how to use the rim pcd 5 wrangler with a jeep near the car was far pcd 5.
Thing to do is make an adapter the size of the old pcd entry and exit with the desiredpcd (pcd wrangler).
But the outcome is going to cause the front wheels will usually come out a little morethan the rear wheels due to the roa freelock front that is located was a bit out.
Then many who do not know that with an adapter on a jeep cj 4WD system can still function, namely by replacing the standard freelock freelock cj by cj-owned diesel. Thusthe function of a 4WD you can walk normally again.