Tag Archives: wheels

Improved Control of Car Modification

Featured

Posted on by

The easiest way to improve the control of the car is, replace the tires are wider and stickier with the size that fit on the car. Biggest changes is the perceived size of the tire is widened. With the use tire material better and width, ball bearing wheels can with stand impact better.

The second is by lowering vehicle, moving the center of gravity by replacing the spring and shock absorbers. Then everything is set and added stabilizer. Installation is very easy stabilizer. But with a replacement spring and shock absorbers have increased control. With the installation of the stabilizer addition will improve the control of a lot better.

Low Suspension Modifications

In general you want to lower your vehicle by replacing a spiral with a lower standard.
Where a spiral lower, the lower your vehicle, but the violence must be increased to avoid a conflict of suspension.

The average force per should be increased by 15% every down 1 inchinya. So if you have a standard 300pon/Inchi violence, then you should replace with the violence that has 390pon/Inchi if lowered 2 inches.

Per standard should not be cut, because they will not have enough violence. Per also will not sit properly in place and the spring will be moving.
If degrading per leaf, it is recommended per leaf made of fiberglass or composite materials. Because it is lighter then the reaction is faster. (Mean ride and better control) Do not do the stamping on a leaf, because it will make a further term, which affects the distance of suspension that will produce collisions stir.

Modifications Turbocharger and Modifications CJ Wrangler Rim

Posted on by

Modification of the turbocharger is not for amateurs, unless it comes with the package.Modification of the turbocharger is not a new thing, some of this year-end enthusiastusers turbocharger increases. Even some standard vehicles already equipped with turbochargers.
Turbocharger is matched with a small capacity engine with low compression due to the amount of fuel that support.
Turbochargers can add a lot of power without having to change the capacity of the engine or engine swap.

Modifications CJ wrangler rim
For those readers who have a jeep car category, there must be some who ask how to use the rim pcd 5 wrangler with a jeep near the car was far pcd 5.
Thing to do is make an adapter the size of the old pcd entry and exit with the desiredpcd (pcd wrangler).
But the outcome is going to cause the front wheels will usually come out a little morethan the rear wheels due to the roa freelock front that is located was a bit out.
Then many who do not know that with an adapter on a jeep cj 4WD system can still function, namely by replacing the standard freelock freelock cj by cj-owned diesel. Thusthe function of a 4WD you can walk normally again.